Question 1

What is IKON HVAC Supply Inc.?

Accepted Answer

IKON HVAC Supply Inc. is a contractor-focused wholesale HVAC supply warehouse located at 455 Gibraltar Dr, Unit #7, Mississauga, ON. We supply licensed HVAC contractors, sheet metal contractors, mechanical contractors, builders, and developers with galvanised duct fittings, gas supplies, fasteners, installation accessories, HVAC equipment, and custom in-house sheet metal fabrication. We do not sell to retail or residential customers.

Question 2

Do you sell to retail customers?

Accepted Answer

No. IKON HVAC Supply is a wholesale supplier serving licensed trades professionals only. All purchases require a valid contractor account with proof of business licensing and HST registration. We serve HVAC contractors, sheet metal contractors, mechanical contractors, commercial builders, and developers across the Greater Toronto Area.

Question 3

What are your warehouse hours?

Accepted Answer

Our Mississauga warehouse is open Monday through Friday, 8:00 AM to 5:00 PM. We are closed on weekends and statutory holidays. Contractor account holders can call ahead to arrange early pickup or after-hours arrangements for urgent job site requirements.

Question 4

Where are you located?

Accepted Answer

We are located at 455 Gibraltar Dr, Unit #7, Mississauga, ON L5T 2S9 — centrally positioned in the GTA industrial zone for easy access from Brampton, Toronto, Oakville, Milton, Vaughan, and Etobicoke. Call 647-221-0990 for directions or to confirm stock before driving in.

Question 5

Do you provide installation services?

Accepted Answer

No. IKON HVAC Supply is a wholesale supply and custom fabrication facility only. We do not provide installation, service, or repair work. Our team can provide technical support and product recommendations, but all installation must be performed by qualified licensed HVAC contractors.

Question 6

What is your fabrication turnaround time?

Accepted Answer

Standard custom sheet metal fabrication turnaround is 5 business days from approved drawings. Rush fabrication is available with 24–48 hour turnaround for urgent contractor needs — contact us before 10 AM for same-day rush options. Large commercial projects may require extended timelines depending on scope and material availability.

Question 7

Do you offer same-day fabrication?

Accepted Answer

Yes, we offer same-day rush fabrication for urgent contractor needs, subject to shop capacity. Contact us at 647-221-0990 before 10 AM to discuss same-day custom duct fabrication in Mississauga. Rush fees apply based on project complexity. Standard turnaround is 5 business days.

Question 8

What materials do you fabricate with?

Accepted Answer

Our in-house fabrication shop works with galvanised steel (20–26 gauge), black iron pipe (Schedule 40), stainless steel, and aluminum. We fabricate rectangular duct, round spiral duct, custom fittings, plenums, transitions, elbows, reducers, tees, and specialty components. All materials meet or exceed CSA and TSSA standards for commercial HVAC installations.

Question 9

Can I submit drawings or sketches for custom fabrication?

Accepted Answer

Absolutely. We accept CAD drawings, hand sketches, PDFs, and field measurements for all custom duct fabrication projects. Email your drawings to admin@ikonhvacsupply.ca or submit them through our online Quote page. Our fabrication team will review your specifications and provide a detailed quote within 24 hours including material costs, labour, and turnaround time.

Question 10

What custom components can you fabricate?

Accepted Answer

We fabricate a wide range of custom sheet metal components: plenums (supply and return), custom transitions, offset elbows (45° and 90°, gored, mitered, or radius), reducers and increasers, tees, take-offs, bullhead tees, conical tees, access doors, spiral duct in non-standard diameters, and any specialty fitting built from your drawings or field measurements.

Question 11

Do you offer a warranty on fabricated products?

Accepted Answer

All custom fabricated ductwork and fittings are guaranteed against manufacturing defects for 12 months from the date of purchase. This covers workmanship, material defects, and dimensional accuracy per approved drawings. Warranty does not cover improper installation, job site damage, or modifications made after delivery.

Question 12

How do I get a quote for a large commercial fabrication project?

Accepted Answer

For large commercial projects, contact our sales team at 647-221-0990 or email admin@ikonhvacsupply.ca. Provide your project drawings, material specifications, quantities, timeline, and delivery location. We will prepare a comprehensive quote including fabrication costs, material pricing, delivery schedule, and payment terms within 48 hours.

Question 13

Do you stock inventory or is everything custom fabricated?

Accepted Answer

We maintain extensive in-stock inventory of standard rectangular duct sections, round spiral pipe, galvanised fittings (elbows, boots, caps, tees, collars), dampers, flex pipe, sheet metal fasteners (screws, rivets, cleats, hangers), installation accessories (Everseal, foil tape, gaskets, mastic), and HVAC equipment. Custom fabrication is available for non-standard sizes and specialty components.

Question 14

What gas supply products do you carry?

Accepted Answer

Our gas supplies category covers four main product lines: Gastite CSST flexible gas tubing (standard and FlashShield bonded), Schedule 40 black iron pipe and fittings (nipples, elbows, tees, couplings, unions, caps, reducers, bushings, flanges), IPEX System 636 PVC and CPVC flue gas venting for high-efficiency condensing appliances, and copper press-fit fittings (elbows, couplings, tees, adapters, unions). All products are available at contractor pricing.

Question 15

Do you carry Gastite FlashShield CSST?

Accepted Answer

Yes. We stock both standard Gastite CSST and Gastite FlashShield System CSST. FlashShield features an integrated black conductive jacket for arc-fault mitigation, meeting bonding code requirements in all Canadian jurisdictions. Available in standard coil lengths at contractor pricing — call 647-221-0990 for current stock and pricing.

Question 16

Do you stock IPEX System 636 venting products?

Accepted Answer

Yes. We carry a comprehensive range of IPEX System 636 certified PVC and CPVC flue gas venting components: pipe sections, elbows (45° and 90°), couplings, tees, reducer tees, reducing bushings, concentric vent kits, horizontal wall termination kits, vent screens, and test plug kits. Both PVC (standard temperature) and CPVC (high-temperature Category IV) options are available.

Question 17

What duct sizes and gauges do you carry in stock?

Accepted Answer

We stock a wide range of standard galvanised rectangular duct sections in common widths and heights, as well as round spiral pipe in standard diameters. For non-standard sizes or gauges, our in-house fabrication shop can produce custom dimensions. Call 647-221-0990 to confirm current stock on the specific sizes your project requires.

Question 18

Do you carry installation accessories like Everseal and foil tape?

Accepted Answer

Yes. Our installation accessories include: gaskets (pre-cut and roll), Everseal duct sealing compound, UL-listed aluminium foil duct tape, water-based duct mastic, galvanised and stainless steel access doors, and duct insulation wrap. All products are stocked at our Mississauga warehouse and available at contractor pricing for bulk orders.

Question 19

Do you carry HVAC equipment like boilers and furnaces?

Accepted Answer

Yes. We stock high-efficiency gas-fired boilers, commercial and residential hot water storage tanks, unit heaters and cabinet heaters, and high-efficiency gas furnaces at wholesale contractor pricing. Call 647-221-0990 for current brand availability, model specifications, and pricing — additional equipment categories are being added to our catalog regularly.

Question 20

What areas do you deliver to?

Accepted Answer

We deliver throughout the Greater Toronto Area including Mississauga, Brampton, Toronto, Oakville, Milton, Vaughan, Etobicoke, and surrounding municipalities within a 60–70 km radius of our Mississauga warehouse. Delivery operates Monday through Friday. For locations outside our standard radius, contact us to discuss options.

Question 21

Is same-day delivery available?

Accepted Answer

Same-day delivery is available for orders placed before noon, subject to vehicle availability and delivery schedule. We operate our own local GTA delivery fleet, Monday through Friday. Call 647-221-0990 before noon to confirm same-day availability for your location and order size.

Question 22

What is the minimum order for delivery?

Accepted Answer

The minimum delivery order is $500 for GTA locations. Orders under the minimum can be picked up at our Mississauga warehouse or combined with future orders to meet the threshold. Large commercial project accounts and ongoing contractor agreements may qualify for reduced minimums — contact our sales team to discuss your specific requirements.

Question 23

Can I pick up orders at your warehouse?

Accepted Answer

Yes. Warehouse pickup is available Monday through Friday, 8:00 AM to 5:00 PM at 455 Gibraltar Dr, Unit #7, Mississauga, ON L5T 2S9. Contractor account holders can call ahead to have orders pulled and ready for pickup. Large fabrication orders may require advance notice for loading dock access and scheduling.

Question 24

How are delivery fees calculated?

Accepted Answer

Delivery fees are based on distance from our Mississauga warehouse and total order size. High-volume contractor accounts and large commercial orders may qualify for reduced or waived delivery fees. Call 647-221-0990 to discuss delivery pricing for your location and project volume.

Question 25

How do contractor accounts work?

Accepted Answer

Opening a contractor account is straightforward. Submit your application through our Contractor Account page with your business license, HST number, and trade references. Once approved, you receive wholesale contractor pricing on all HVAC supply inventory, access to custom fabrication services, and credit term eligibility. Most accounts are approved within 24–48 hours.

Question 26

What documentation is required to open an account?

Accepted Answer

To open a contractor account you will need: valid business registration or business license, HST registration number, trade or professional license (HVAC, gas technician, or applicable trade), business address and contact information, and trade references. Submit your application online or call 647-221-0990 and our team will walk you through the process.

Question 27

Do you offer credit terms?

Accepted Answer

Yes. Approved contractor accounts qualify for NET 30 credit terms. Extended payment options are available for large commercial projects and bulk orders. Credit limits are established based on trade references, business history, and project volume. Cash accounts receive immediate pickup privileges at our warehouse.

Question 28

Do you offer bulk contractor pricing and volume discounts?

Accepted Answer

Absolutely. IKON HVAC Supply specializes in bulk contractor pricing for large commercial projects, multi-unit residential builds, and ongoing maintenance contracts. Volume discounts apply to ductwork, fittings, gas piping, fasteners, and fabricated components. Contact our sales team at 647-221-0990 to discuss project-specific volume pricing.

Question 29

Are there minimum purchase requirements for contractor accounts?

Accepted Answer

There are no minimum purchase requirements for in-warehouse pickup orders on approved contractor accounts. A $500 minimum applies specifically to delivery orders. For custom fabrication orders, minimum order requirements depend on the complexity and material cost of the fabricated components — contact us for project-specific details.

Question 30

Can I get a quote without a contractor account?

Accepted Answer

Yes. You can request a fabrication or supply quote through our Quote page or by calling 647-221-0990 without an existing account. However, to place orders and access wholesale contractor pricing, an approved contractor account is required. Account applications are processed within 24–48 hours.

First Order Discount

Frequently Asked Questions

General Questions

What is IKON HVAC Supply Inc.?

Do you sell to retail customers?

What are your warehouse hours?

Where are you located?

Do you provide installation services?

Still Have Questions?

Galvanised Duct Fitting

Gas Supplies

Fasteners

Duct Accessories

HVAC Equipment

All Product Categories

First Order Discount

Frequently Asked Questions

General Questions

What is IKON HVAC Supply Inc.?

Do you sell to retail customers?

What are your warehouse hours?

Where are you located?

Do you provide installation services?

Still Have Questions?

Browse Our Product Categories

Galvanised Duct Fitting

Gas Supplies

Fasteners

Duct Accessories

HVAC Equipment

All Product Categories